Fetch failures & restricted ports

← all maintainers

Failed to fetch/extract (256)

Nothing here was actually checked -- these need attention before their license status means anything. None require a browser/manual download by default (this run used NO_DEPENDS=yes, which skips installing build toolchains); read the error column first -- most failures here are a missing language toolchain (USES=go/cargo/gem/etc. needing that runtime installed to resolve its own module dependencies during fetch), not a genuine manual-download requirement. A real "must download by hand" case usually shows as a fetch(1) or checksum error instead.
PortMaintainerLICENSELast error
archivers/rar-i386sunpoet@FreeBSD.orgRAR===> rar-i386-7.01 is only for i386, while you are running amd64 (reason: amd64 users should use archivers/rar). *** Error code 1
audio/bespokesynthyuri@FreeBSD.orgGPLv3broken with clang-19: see https://github.com/BespokeSynth/BespokeSynth/issues/1687. *** Error code 1
audio/essentiayuri@FreeBSD.orgAGPLv3===> essentia-2.1.b5.1417 is marked as broken: Fails to build with FFmpeg 9. *** Error code 1
audio/lv2procyuri@FreeBSD.orgGPLv3===> lv2proc-0.5.1_4 is marked as broken: fails to build with audio/lilv 0.26.4. *** Error code 1
audio/lvtkyuri@FreeBSD.orgGPLv3compatible with python-3.12: No module named 'imp', see https://github.com/lvtk/lvtk/issues/60. *** Error code 1
audio/stegosaurus-lv2yuri@FreeBSD.orgGPLv3===> stegosaurus-lv2-0.0.3 is marked as broken: incompatible with Python-3.11, see https://github.com/mxmilkiib/stegosaurus/issues/7. *** Error code 1
audio/virtual_osschristos@FreeBSD.orgBSD2CLAUSE===> virtual_oss-1.3.3 included in base system. *** Error code 1
benchmarks/mangohuddanfe@FreeBSD.orgMIT===> mangohud-0.6.5_3 is marked as broken: https://github.com/flightlessmango/MangoHud/issues/927. *** Error code 1
biology/gatkyuri@FreeBSD.orgBSD3CLAUSE==> Fetching gatk including large LFS files fatal: destination path 'gatk-4.6.2.0' already exists and is not an empty directory. *** Error code 128
biology/phrapmzaki@m.u-tokyo.ac.jpPHRAPe-mail, place it manually in /usr/ports/distfiles/phrap, and then try it again. *** Error code 1
biology/phredmzaki@m.u-tokyo.ac.jpPHRED=> Couldn't fetch it - please try to retrieve this => port manually into /usr/ports/distfiles and try again. *** Error code 1
cad/yosys-systemverilogyuri@FreeBSD.orgAPACHE20with the latest cad/uhdm, see https://github.com/antmicro/yosys-systemverilog/issues/1845. *** Error code 1
chinese/opencc-cliyuri@FreeBSD.orgAPACHE20error: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
chinese/wordpress-zh_TWdelphij@FreeBSD.orgGPLv2+===> zh-wordpress-zh_TW-7.1 localized distfile not yet available upstream. *** Error code 1
comms/zigbee2mqttotis@FreeBSD.orgGPLv3=> Either /usr/ports/comms/zigbee2mqtt/distinfo is out of date, or => zigbee2mqtt-nodemodules-2.0.0_1.tar.gz is spelled incorrectly. *** Error code 1
databases/cassandra4language.devel@gmail.comAPACHE20*** Error code 1 make[1]: stopped making "fetch" in /usr/ports/databases/cassandra4 *** Error code 1
databases/cassandra5language.devel@gmail.comAPACHE20/usr/ports/databases/cassandra5/work/apache-cassandra-5.0.8-src/build.xml:216: Unsupported JDK version used: 25 Total time: 0 seconds *** Error code 1
databases/linux-c7-sqlite3emulation@FreeBSD.orgPD=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
databases/linux-oracle-instantclient-basicpi@FreeBSD.orgOracleinstantclient-basic-linux32-10.2.0.3-20061115.zip and place it in /usr/ports/distfiles/oracle/. *** Error code 1
databases/linux-oracle-instantclient-sdkpi@FreeBSD.orgOracleinstantclient-sdk-linux32-10.2.0.3-20061115.zip and place it in /usr/ports/distfiles/oracle/. *** Error code 1
databases/mongodb80ronald@FreeBSD.orgAPACHE20 SSPLv1=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
databases/ocaml-mysqldanfe@FreeBSD.orgLGPL21===> ocaml-mysql-1.2.4_2 cannot install: does not work with MySQL version 84 (MySQL 80 81 84 not supported). *** Error code 1
databases/pg_searchfeld@FreeBSD.orgAGPLv3=> Couldn't fetch it - please try to retrieve this => port manually into /usr/ports/distfiles and try again. *** Error code 1
databases/pg_store_plansjoseph@2egos.deCustom===> pg_store_plans-1.8 Only supported up to pgsql 16. *** Error code 1
databases/postgis33lbartoletti@FreeBSD.orgGPLv2===> postgis33-3.3.8_10 Only supported up to pgsql 17. *** Error code 1
databases/postgis34lbartoletti@FreeBSD.orgGPLv2===> postgis34-3.4.4_10 Only supported up to pgsql 17. *** Error code 1
databases/postgresql-jdbcpgsql@FreeBSD.orgBSD3CLAUSE=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
databases/postgresql-promscalefeld@FreeBSD.orgPostgreSQL===> postgresql18-promscale-0.8.0_31 Only supported up to pgsql 15. *** Error code 1
databases/py-harlequinnivit@FreeBSD.orgMIT===> py312-harlequin-2.13.0 is marked as broken: fails to run because requires devel/py-tree-sitter >= 0.25.2 (see PR 289772). *** Error code 1
databases/rubygem-mysqlruby@FreeBSD.orgGPLv2 RUBY===> rubygem-mysql-2.9.1_4 cannot install: does not work with MySQL version 84 (MySQL 80 81 84 not supported). *** Error code 1
deskutils/gnome-shell-extension-coverflowgnome@FreeBSD.orgGPLv3+===> gnome-shell-extension-coverflow-0.0.0.20180110_3 is marked as broken: Does not support recent gnome-shell. *** Error code 1
deskutils/gnome-todognome@FreeBSD.orgGPLv3===> gnome-todo-41.0_7 is marked as broken: fails to build, fatal error: 'girepository.h' file not found. *** Error code 1
deskutils/qmdyuri@FreeBSD.orgMITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
devel/cpp-netlibzi@FreeBSD.orgBSL===> cpp-netlib-0.13.0_14 is marked as broken: fails to build with Boost>=1.87. *** Error code 1
devel/dwarvescem@FreeBSD.orgBSD2CLAUSE GPLv2 LGPL21cp: /usr/local/share/gnulib/lib/exitfail.c: No such file or directory cp: /usr/local/share/gnulib/lib/gettext.h: No such file or directory *** Error code 1
devel/eclipse-titanhrs@FreeBSD.orgEPL===> eclipse-titan-11.1.0 is marked as broken: Fails to build, /bin/sh: perl: not found. *** Error code 1
devel/electron41tagattie@FreeBSD.orgBSD3CLAUSE LGPL21 MPL11 MIT=> SHA256 Checksum OK for electron/rollup-rollup-v4.22.4_GH0.tar.gz. => SHA256 Checksum OK for electron/evanw-esbuild-v0.28.1_GH0.tar.gz. *** Signal 15
devel/electron42tagattie@FreeBSD.orgBSD3CLAUSE LGPL21 MPL11 MIT=> SHA256 Checksum OK for electron/rollup-rollup-v4.22.4_GH0.tar.gz. => SHA256 Checksum OK for electron/evanw-esbuild-v0.28.1_GH0.tar.gz. *** Signal 15
devel/electron43tagattie@FreeBSD.orgBSD3CLAUSE LGPL21 MPL11 MIT=> SHA256 Checksum OK for electron/rollup-rollup-v4.60.4_GH0.tar.gz. => SHA256 Checksum OK for electron/evanw-esbuild-v0.28.1_GH0.tar.gz. *** Signal 15
devel/ftxuiyuri@FreeBSD.orgMIT=> Couldn't fetch it - please try to retrieve this => port manually into /usr/ports/distfiles and try again. *** Error code 1
devel/gitggnome@FreeBSD.orgGPLv2redefinition with different types ('struct _GIBaseInfoStub' vs 'struct _GIBaseInfo'). *** Error code 1
devel/glib20desktop@FreeBSD.orgLGPL20cp -f -r /usr/local/gobject-introspection-bootstrap/libdata/pkgconfig /usr/ports/devel/glib20/work-default/.pkgconfig cp: /usr/local/gobject-introspection-bootstrap/libdata/pkgconfig: No such file or directory *** Error code 1
devel/hp48xgccdanfe@FreeBSD.orgGPLv2===> hp48xgcc-1.0.2_2 is only for i386, while you are running amd64. *** Error code 1
devel/jetbrains-golanddmitry.wagin@ya.ruIntelliJ-GoLand=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
devel/libgnuregexkevans@FreeBSD.orgLGPL20+cp: /usr/local/share/gnulib/lib/regcomp.c: No such file or directory cp: /usr/local/share/gnulib/lib/verify.h: No such file or directory *** Error code 1
devel/p5-FreeBSD-i386-Ptraceperl@FreeBSD.orgART10 GPLv1+===> p5-FreeBSD-i386-Ptrace-0.05 is only for i386, while you are running amd64. *** Error code 1
devel/p5-PkgConfig-LibPkgConfsunpoet@FreeBSD.orgART10 GPLv1===> p5-PkgConfig-LibPkgConf-0.11 is marked as broken: Incompatible with pkgconf 3.0 and newer. *** Error code 1
devel/papipizzamig@FreeBSD.orgBSD3CLAUSE===> papi-5.4.3_12 is marked as broken: freebsd.c:361:92: error: too few arguments to function call, expected 6, have 5. *** Error code 1
devel/py-ipymplmakc@FreeBSD.orgBSD3CLAUSE===> py312-ipympl-0.9.8_3 is marked as broken: fails to build after recent update of jupyter ports. *** Error code 1
devel/py-setuptoolspython@FreeBSD.orgMIT=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
devel/py-setuptools44python@FreeBSD.orgMIT=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
devel/py-setuptools58python@FreeBSD.orgMIT===> py312-setuptools58-58.5.3_3 is marked as broken: does not build with pyproject_hooks 1.1.0. *** Error code 1
devel/py-tableswen@FreeBSD.orgBSD3CLAUSE They will not build together. Please remove them first with pkg delete. *** Error code 1
devel/pyside2kde@FreeBSD.orgLGPL3===> py312-pyside2-5.15.19 is marked as broken: does not support Python 3.12+. *** Error code 1
devel/rubygem-mmap2mfechner@FreeBSD.orgRUBY===> rubygem-mmap2-2.2.9_1 is marked as broken: mmap.c:1108:24: error: no member named 'rmatch' in 'struct RMatch'. *** Error code 1
devel/rubygem-xdgsunpoet@FreeBSD.orgHIPPOCRATIC===> rubygem-xdg-10.3.0 is marked as broken: does not build with Ruby 3.4. *** Error code 1
devel/tailorportmaster@BSDforge.comGPLv3+===> tailor-0.9.37_2 is marked as broken: Does not build with Python 3.12 and later. *** Error code 1
devel/wasi-compiler-rtvishwin@FreeBSD.orgLLVM2===> wasi-compiler-rt-master-0 is a meta-port; there is nothing to build. *** Error code 1
devel/wasi-libcxxvishwin@FreeBSD.orgLLVM2===> wasi-libcxx-master-0 is a meta port; there is nothing to build. *** Error code 1
devel/xeus-clingyuri@FreeBSD.orgBSD3CLAUSExmanager.hpp:125:35: error: no type named 'OptionException' in namespace 'cxxopts'; 0.15.3-5-g93d61b9 also doesn't build due to outdated lang/cling. *** Error code 1
dns/doglcook@FreeBSD.orgEUPL12===> dog-0.1.0_52 is marked as broken: Fails to detect OpenSSL 3.0.0 and later. *** Error code 1
emulators/gensports@FreeBSD.orgGPLv2===> gens-2.15.5_5 is only for i386, while you are running amd64 (reason: uses i386 assembly code). *** Error code 1
emulators/hv_kvp_cmdpavelivolkov@gmail.comMIT===> hv_kvp_cmd-1.4_1 requires system source tree in the /usr/src. *** Error code 1
emulators/libretro-reicastbeyert@cs.ucr.eduBSD3CLAUSE GPLv2 LGPL21===> libretro-reicast-0.20201231_5 is marked as broken: Fails to build, fatal error: linux/input.h: No such file or directory. *** Error code 1
emulators/mastergearports@FreeBSD.orgNONE===> mastergear-2.0_4 is only for i386, while you are running amd64 (reason: is an i386 binary). *** Error code 1
emulators/reicastbeyert@cs.ucr.eduBSD3CLAUSE GPLv2 LGPL21===> reicast-0.20201231_5 is marked as broken: Fails to build, fatal error: linux/input.h: No such file or directory. *** Error code 1
emulators/zsnescyberbotx@cyberbotx.comGPLv2===> zsnes-1.51_12,1 is only for i386, while you are running amd64 (reason: non-portable, for a portable emulator see emulators/snes9x). *** Error code 1
filesystems/darling-dmgfreebsd@sysctl.czGPLv3===> darling-dmg-1.0.4_1 is marked as broken: Fails to build with ICU 76.1. *** Error code 1
filesystems/mcp-server-filesystemyuri@FreeBSD.orgMITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
finance/taler-exchangeadridg@FreeBSD.orgGPLv3===> taler-exchange-1.5.2 is marked as broken: error: use of undeclared identifier 'GNUNET_CRYPTO_QUALITY_STRONG'. *** Error code 1
french/asterthierry@FreeBSD.orgGPLv2===> fr-aster-14.6.0.1_14 is marked as broken: fails to build the catalog of elements. *** Error code 1
games/HeroesOfMightAndMagicports@FreeBSD.orgHeroesOfMightAndMagic===> HeroesOfMightAndMagic-3_1 HeroesOfMightAndMagic-3_1 requires CDROM_MOUNT to be set to the mount point of the CD. *** Error code 1
games/ankikai@FreeBSD.orgAGPLv3+===> Prefetching node modules env: yarn: No such file or directory *** Error code 127
games/doomports@FreeBSD.orgIDSOFTWARE===> doom-1.10_7 is only for i386, while you are running amd64. *** Error code 1
games/frogattofiziologus@gmail.comFROGATTO GPLv3===> frogatto-1.3.1_35 is marked as broken: fails to build with Boost>=1.87. *** Error code 1
games/libretro-scummvmports@FreeBSD.orgGPLv2===> libretro-scummvm-0.20231021 is marked as broken: requires network access. *** Error code 1
games/linux-etqw-demo-serverports@FreeBSD.orgIDSOFTWARE=> SHA256 Checksum OK for ETQW-demo2-server-full.r1.x86.run. tail: /usr/ports/distfilesETQW-demo2-server-full.r1.x86.run: No such file or directory *** Error code 1
games/linux-etqw-serverports@FreeBSD.orgIDSOFTWARE=> SHA256 Checksum OK for ETQW-server-1.5-full.x86.run. tail: /usr/ports/distfilesETQW-server-1.5-full.x86.run: No such file or directory *** Error code 1
games/linux-nwnclientscf@FreeBSD.orgnwnclient=> Either /usr/ports/games/linux-nwnclient/distinfo is out of date, or => linux-nwnclient/nwclient129.tar.gz is spelled incorrectly. *** Error code 1
games/linux-ssamtfeports@FreeBSD.orgssam===> linux-ssamtfe-1.05b3_1 linux-ssamtfe-1.05b3_1 requires CDROM_MOUNT set to mount point of CD. *** Error code 1
games/linux-ssamtsescf@FreeBSD.orgssam===> linux-ssamtse-1.07b1_1 linux-ssamtse-1.07b1_1 requires CDROM_MOUNT set to mount point of CD. *** Error code 1
games/linux-unrealgoldports@FreeBSD.orgunreal=> SHA256 Checksum OK for linux-ut/unrealgold-install-436.run. linux-unrealgold-436_2 requires CDROM_MOUNT set to mount point of CD *** Error code 1
games/linux-utscf@FreeBSD.orgunreal===> linux-ut-436_5,1 requires CDROM_MOUNT set to mount point of CD. *** Error code 1
games/lmpcdanfe@FreeBSD.orgGPLv2+===> lmpc-3.4.4 is only for armv6 armv7 i386 powerpc, while you are running amd64 (reason: assumes sizeof(long) == 4). *** Error code 1
games/wyrmgusamdmi3@FreeBSD.orgGPLv2+===> wyrmgus-5.3.6_1 is marked as broken: does not build because boost asio is not compatible with c++20. *** Error code 1
games/xchadanceports@FreeBSD.orgxchadanceenv: /usr/local/bin/lha: No such file or directory ===> Failed to extract "/usr/ports/distfiles/xchada01.lzh". *** Error code 1
german/unix-connectdinoex@FreeBSD.orgGPLv2 BSD3CLAUSE===> de-unix-connect-0.95_3 needs UC_GATEWAY_HOSTNAME and UC_GATEWAY_DOMAIN. *** Error code 1
graphics/R-cran-GDDskreuzer@FreeBSD.orgGPLv2===> R-cran-GDD-0.1.13.1_17 is marked as broken: Fails to compile with the latest version of R. *** Error code 1
graphics/artyuri@FreeBSD.orgGPLv3env: gtar: No such file or directory ===> Failed to extract "/usr/ports/distfiles/ART-1.26.7.tar.xz". *** Error code 1
graphics/asepriteyuri@FreeBSD.orgEULA=> SHA256 Checksum OK for aseprite-undo-93fc81d_GH0.tar.gz. cp: /usr/ports/x11/pixman/work/pixman-0.46.4/pixman/pixman-combine32.h: No such file or directory *** Error code 1
graphics/dcraw-mwaitman@waitman.netGPLv2=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
graphics/flphotoports@FreeBSD.orgGPLv2+=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
graphics/gimpgnome@FreeBSD.orgNA=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
graphics/hiptextyuri@FreeBSD.orgAPACHE20===> hiptext-0.2.8 is marked as broken: compilation fails: does not build with ffmpeg-8, see https://github.com/jart/hiptext/issues/63. *** Error code 1
graphics/leptonports@virtual-estates.netAPACHE20===> lepton-0.2022.04.13_1 requires SSSE3 features in the processor. *** Error code 1
graphics/magnum-integrationyuri@FreeBSD.orgMITwork/magnum-integration-2020.06-264-g50ac4db/src/Magnum/ImGuiIntegration/Context.cpp:322:23: error: no member named 'TextureId' in 'ImDrawCmd', "pcmd->TextureId". *** Error code 1
graphics/openfx-arenaolivier@FreeBSD.orgGPLv2===> openfx-arena-2.4.3_25 is marked as broken: Fails to build, ld: error: unable to find library -l-lpthread. *** Error code 1
graphics/osprayyuri@FreeBSD.orgAPACHE20===> ospray-2.10.0_11 is marked as broken: expects embree to be compiled with EMBREE_GEOMETRY_INSTANCE=ON. *** Error code 1
graphics/p5-Gimpperl@FreeBSD.orgART10 GPLv1+===> p5-Gimp-2.38_2 is marked as broken: fails to build. *** Error code 1
graphics/py-mayaviyuri@FreeBSD.orgBSD3CLAUSE LGPL21 LGPL20 EPL LGPL3 BSD2CLAUSE APACHE11===> py312-mayavi-4.8.2_10 is marked as broken: compilation fails: VTK throws std::runtime_erroe, see https://gitlab.kitware.com/vtk/vtk/-/issues/19994. *** Error code 1
graphics/py-opencv-python-headlessyuri@FreeBSD.orgMIT===> py312-opencv-python-headless-4.13.0.92_2 is marked as broken: Fails to build with FFmpeg 9. *** Error code 1
graphics/rubygem-dragonflyruby@FreeBSD.orgMIT=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
graphics/yedports@FreeBSD.orgYED_1_2'http://www.yworks.com/downloads#yEd', place it in /usr/ports/distfiles and then run make again. *** Error code 1
japanese/eijiro-fpwports@FreeBSD.orgeijiro-fpw*** Error code 1 make[1]: stopped making "check-build-conflicts extract-message checksum extract-depends clean-wrkdir /usr/ports/japanese/eijiro-fpw/work do-extract post-extract extract-fixup-modes" in /usr/ports/japanese/eijiro-fpw *** Error code 1
japanese/font-mikachanTsurutaniNaoki@gmail.commikachan*** Error code 1 make[1]: stopped making "check-build-conflicts extract-message checksum extract-depends clean-wrkdir /usr/ports/japanese/font-mikachan/work/ja-font-mikachan-9.1 do-extract extract-fixup-modes" in /usr/ports/japanese/font-mikachan *** Error code 1
japanese/lynxCQG00620@nifty.ne.jpGPLv2=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
japanese/lynx-currentCQG00620@nifty.ne.jpGPLv2=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
japanese/migemonobutaka@FreeBSD.orgGPLv2===> ja-migemo-0.40_9,1 is marked as broken: does not build with Ruby 3.4. *** Error code 1
japanese/waeijiro-fpwports@FreeBSD.orgwaeijiro*** Error code 1 make[1]: stopped making "check-build-conflicts extract-message checksum extract-depends clean-wrkdir /usr/ports/japanese/waeijiro-fpw/work do-extract post-extract extract-fixup-modes" in /usr/ports/japanese/waeijiro-fpw *** Error code 1
java/apache-commons-httpclientale@FreeBSD.orgAPACHE20=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
java/jdk11-docjava@FreeBSD.orgjdkthe "Download" link for the "Java SE 11 Documentation", place it in /usr/ports/distfiles and then run make again. *** Error code 1
java/jdk8-docjava@FreeBSD.orgjdkthe "Download" link for the "Java SE 8 Documentation", place it in /usr/ports/distfiles and then run make again. *** Error code 1
java/linux-oracle-jre18java@FreeBSD.orgjrehttp://www.oracle.com/technetwork/java/javase/downloads/index.html, place it in /usr/ports/distfiles and then run make again. *** Error code 1
java/linux-oracle-serverjre10java@FreeBSD.orgserverjrehttp://www.oracle.com/technetwork/java/javase/downloads/index.html, place it in /usr/ports/distfiles and then run make again. *** Error code 1
lang/bunyuri@FreeBSD.orgLGPL20===> bun-1.3.14_4 is marked as broken: Checksum error. *** Error code 1
lang/intel-compute-runtimeports@FreeBSD.orgMIT===> intel-compute-runtime-llvm14-22.24.23453 is marked as broken: Does not build with latest level-zero. *** Error code 1
lang/juliaports@FreeBSD.orgMIT===> julia-1.10.5_1 is marked as broken: Fails to build, build crashes. *** Error code 1
lang/mecrisp-stellarisfuz@FreeBSD.orgGPLv3+===> mecrisp-stellaris-3.0.1 is only for aarch64 armv6 armv7, while you are running amd64 (reason: written in ARM assembly). *** Error code 1
lang/python310python@FreeBSD.orgPSFL=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
lang/python311python@FreeBSD.orgPSFL=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
lang/python312python@FreeBSD.orgPSFL=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
lang/python313python@FreeBSD.orgPSFL=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
lang/python313tpython@FreeBSD.orgPSFL=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
lang/python314python@FreeBSD.orgPSFL=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
lang/python314tpython@FreeBSD.orgPSFL=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
lang/quilcyuri@FreeBSD.orgAPACHE20*** Error code 1 make[1]: stopped making "checksum" in /usr/ports/lang/quilc *** Error code 1
mail/claws-mail-gdataportmaster@BSDforge.comGPLv3===> claws-mail-gdata-4.4.0 temporarily removed from Claws Mail build. *** Error code 1
mail/cyrus-imapd25ume@FreeBSD.orgBSD4CLAUSE=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
mail/cyrus-imapd30ume@FreeBSD.orgBSD4CLAUSE=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
mail/cyrus-imapd32ume@FreeBSD.orgBSD4CLAUSE=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
mail/exim-sa-eximfluffy@FreeBSD.orgGPLv2===> exim-sa-exim-4.100+4.2.1 is marked as broken: Unmaintained extension. *** Error code 1
math/SCIPyuri@FreeBSD.orgAPACHE20env: gtar: No such file or directory ===> Failed to extract "/usr/ports/distfiles/scip-10.0.2.tgz". *** Error code 1
math/g2oyuri@FreeBSD.orgLGPL3 GPLv3static assertion failed due to requirement 'is_unsigned<int>::value', see https://github.com/RainerKuemmerle/g2o/issues/838. *** Error code 1
math/gismoyuri@FreeBSD.orgMPL20===> gismo-25.07.0 is marked as broken on FreeBSD 15.1: compilation is broken with clang-19, see https://github.com/gismo/gismo/issues/741. *** Error code 1
math/octave-forge-chartjsstephen@FreeBSD.orgGPLv3===> octave-forge-chartjs-0.1.0_3 is marked as broken: does not build with boost version 1.87. *** Error code 1
math/octave-forge-data-smoothingstephen@FreeBSD.orgGPLv3===> octave-forge-data-smoothing-1.3.0_28 is marked as broken: depends upon math/octave-forge-optim, which is broken. *** Error code 1
math/octave-forge-databasestephen@FreeBSD.orgGPLv3===> octave-forge-database-2.4.4_11 is marked as broken: does not build with octave>=8. *** Error code 1
math/octave-forge-econometricsstephen@FreeBSD.orgGPLv3===> octave-forge-econometrics-1.1.2_10 is marked as broken: depends upon math/octave-forge-optim, which is broken. *** Error code 1
math/octave-forge-fitsstephen@FreeBSD.orgGPLv3===> octave-forge-fits-1.0.7_25 is marked as broken: does not build with octave version >= 9.1.0. *** Error code 1
math/octave-forge-gnuplotstephen@FreeBSD.orgGPLv3===> octave-forge-gnuplot-1.0.1_31 is marked as broken: does not install with octave version >= 9.1.0. *** Error code 1
math/octave-forge-informationtheorystephen@FreeBSD.orgGPLv2===> octave-forge-informationtheory-0.1.8_34 is marked as broken: does not install with octave version >= 9.1.0. *** Error code 1
math/octave-forge-irsastephen@FreeBSD.orgGPLv2===> octave-forge-irsa-1.0.7_34 is marked as broken: does not install with octave version >= 9.1.0. *** Error code 1
math/octave-forge-level-setstephen@FreeBSD.orgGPLv3===> octave-forge-level-set-0.3.0_23 is marked as broken: does not build with octave version >= 9.1.0. *** Error code 1
math/octave-forge-mechanicsstephen@FreeBSD.orgGPLv3===> octave-forge-mechanics-1.3.1_27 is marked as broken: does not build with octave=8. *** Error code 1
math/octave-forge-mpistephen@FreeBSD.orgGPLv3===> octave-forge-mpi-3.1.0_7 is marked as broken: does not build with octave>=8. *** Error code 1
math/octave-forge-nlwing2stephen@FreeBSD.orgGPLv3===> octave-forge-nlwing2-1.2.0_31 is marked as broken: does not build with octave>=8. *** Error code 1
math/octave-forge-nnetstephen@FreeBSD.orgGPLv2===> octave-forge-nnet-0.1.13_31 is marked as broken: does not install with octave version >= 9.1.0. *** Error code 1
math/octave-forge-piqpstephen@FreeBSD.orgBSD2CLAUSE===> octave-forge-piqp-0.5.0_3 is marked as broken: does not build with octave version >= 10.1.0. *** Error code 1
math/octave-forge-plotstephen@FreeBSD.orgGPLv2===> octave-forge-plot-1.1.0_29 is marked as broken: does not install with octave version >= 9.1.0. *** Error code 1
math/octave-forge-specfunstephen@FreeBSD.orgGPLv3===> octave-forge-specfun-1.1.0_29 is marked as broken: does not build with octave>=8. *** Error code 1
math/octave-forge-symbandstephen@FreeBSD.orgGPLv2===> octave-forge-symband-1.0.10_34 is marked as broken: does not install with octave version >= 9.1.0. *** Error code 1
math/py-SQNomadyuri@FreeBSD.orgLGPL3===> py312-SQNomad-0.2.3_1 is marked as broken: fails to build with NumPy 2.x. *** Error code 1
math/xlapackfortran@FreeBSD.orgBSD3CLAUSE===> xlapack-3.12.1 is marked as broken: 3.12.1 does not build, see https://github.com/Reference-LAPACK/lapack/issues/1092. *** Error code 1
misc/bun-decompileyuri@FreeBSD.orgGPLv3error: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
misc/clawhubyuri@FreeBSD.orgMITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
misc/github-copilot-language-serveryuri@FreeBSD.orgMITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
misc/grok-cliyuri@FreeBSD.orgMITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
misc/mcp-inspectoryuri@FreeBSD.orgAPACHE20 MITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
misc/nanocoderyuri@FreeBSD.orgMITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
misc/openclawyuri@FreeBSD.orgMITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
misc/py-gpiozeroyuri@FreeBSD.orgBSD3CLAUSE===> py312-gpiozero-2.0.1 is only for aarch64, while you are running amd64 (reason: intended only for Raspberry Pi). *** Error code 1
misc/qwen-codeolivier@FreeBSD.orgAPACHE20error: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
misc/rajayuri@FreeBSD.orgMIT===> raja-2025.12.2 is marked as broken: broken by the camp-2026.07.0 update, fix is in development: https://github.com/llnl/RAJA/issues/2062. *** Error code 1
misc/raspberrypi-gpioshutdownbobf@mrp3.comBSD2CLAUSE===> raspberrypi-gpioshutdown-1.0.1501502_1 is only for armv6 armv7, while you are running amd64. *** Error code 1
misc/susv2mandree@FreeBSD.orgNONEhttp://pubs.opengroup.org/onlinepubs/7908799/download/ to accept their license and download susv2.tar.bz2 into /usr/ports/distfiles. *** Error code 1
misc/susv3mandree@FreeBSD.orgNONEEdition Online", navigate to it, and then find the Download link at the bottom right of the page. *** Error code 1
misc/susv4mandree@FreeBSD.orgNONEPlease visit http://www.unix.org/online.html to accept their license and download susv4-2018.tar.bz2 into /usr/ports/distfiles/susv4-20220408. *** Error code 1
multimedia/avidemuxvvd@FreeBSD.orgGPLv2=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
multimedia/mlt7kde@FreeBSD.orgGPLv2 GPLv3 LGPL21=> Either /usr/ports/multimedia/mlt7/distinfo is out of date, or => mlt-7.38.0.tar.gz is spelled incorrectly. *** Error code 1
multimedia/mlt7-glaxnimatekde@FreeBSD.orgGPLv2 GPLv3=> Either /usr/ports/multimedia/mlt7/distinfo is out of date, or => mlt-7.38.0.tar.gz is spelled incorrectly. *** Error code 1
multimedia/mlt7-qtkde@FreeBSD.orgGPLv2 GPLv3=> Either /usr/ports/multimedia/mlt7/distinfo is out of date, or => mlt-7.38.0.tar.gz is spelled incorrectly. *** Error code 1
multimedia/mythtvahicks@p-o.co.ukGPLv2+===> mythtv-35.0_1,1 is marked as broken: WARNING: disabling Python bindings; missing pip, wheel. *** Error code 1
multimedia/oliveyuri@FreeBSD.orgGPLv3===> olive-video-editor-0.2.0_4 is marked as broken: Fails to build with FFmpeg 9. *** Error code 1
multimedia/py-torchcodecyuri@FreeBSD.orgBSD3CLAUSE===> py312-torchcodec-0.13.0 is marked as broken: Fails to build with FFmpeg 9. *** Error code 1
multimedia/smelteryuri@FreeBSD.orgMIT===> smelter-0.6.0_1 is marked as broken: Fails to build with FFmpeg 9. *** Error code 1
multimedia/vapoursynth-l-smash-worksports@FreeBSD.orgISCL===> vapoursynth-l-smash-works-20260326 is marked as broken: Fails to build with FFmpeg 9. *** Error code 1
multimedia/wl-screenrecports@FreeBSD.orgAPACHE208.1+, non-exhaustive patterns: `sys::AVColorPrimaries::AVCOL_PRI_EXT_BASE` and `sys::AVColorPrimaries::AVCOL_PRI_EXT_NB` not covered. *** Error code 1
net-im/debugtoxyuri@FreeBSD.orgGPLv3===> debugtox-g20250207_1 is marked as broken: fails to compile with toxcore-0.2.20. *** Error code 1
net-im/deltachat-desktopfeld@FreeBSD.orgAGPLv3===> Normalizing timestamps and permissions of prefetched node modules /tmp/makeY7fdxx: jq: not found *** Error code 127
net-im/linux-whatsdesknivit@FreeBSD.orgAGPLv3 BSD3CLAUSE CC-BY-2.5 CC-BY-3.0 LGPL21 MIT MPL11/usr/local/bin/deb2targz /usr/ports/distfiles/whatsdesk_0.3.9_amd64.deb make: exec(/usr/local/bin/deb2targz): No such file or directory *** Error code 1
net-im/signal-clijaap.aarts1@gmail.comGPLv3zip -d /usr/ports/net-im/signal-cli/work/signal-cli-0.14.7/lib/libsignal-client-*.jar libsignal_jni_amd64.so /bin/sh: zip: not found *** Error code 127
net-mgmt/super_mediatornacho319+freebsdZilla@gmail.comGPLv2===> super_mediator-1.6.0_3 cannot install: does not work with MySQL version 84 (MySQL 80 81 84 not supported). *** Error code 1
net-p2p/c-lightningvd@FreeBSD.orgMIT=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
net-p2p/libtorrent-rasterbaryuri@FreeBSD.orgBSD3CLAUSE===> libtorrent-rasterbar-1.2.20_2,2 is marked as broken: fails to build with Boost>=1.87, see https://github.com/arvidn/libtorrent/issues/7875. *** Error code 1
net/aquantia-atlantic-kmodports@FreeBSD.orgBSD3CLAUSE===> aquantia-atlantic-kmod-0.0.5.1501502_3 is included in the base system in FreeBSD 15.2 and later. *** Error code 1
net/citrix_icaports@FreeBSD.orgcitrixvisit https://www.citrix.com/downloads/citrix-receiver/linux/ accept their license and download linuxx86-13.10.0.20.tar.gz into /usr/ports/distfiles. *** Error code 1
net/cjdnsyuri@FreeBSD.orgGPLv3===> cjdns-21.1_2 is marked as broken: 21.1 is incompatible with Puython-3.11, and 22.0 fails to build, see https://github.com/hyperboria/bugs/issues/219. *** Error code 1
net/deviceatlas-enterprise-cdcarlier@deviceatlas.comdeviceatlas-enterprise-c-licenseDevice Detection C API from https://deviceatlas.com/deviceatlas-haproxy-module and place it in /usr/ports/distfiles and then run make again. *** Error code 1
net/radiatorlyngbol@wheel.dkradiatorbuild. (optionally download patches-4.29.tar.gz to the same directory as well). *** Error code 1
net/read_bbrlogolivier@FreeBSD.orgBSD2CLAUSE===> read_bbrlog-1.6 builds only on FreeBSD head with minimum version 1600014. *** Error code 1
net/shelldapmahlon@martini.nuBSD3CLAUSE/usr/local/bin/pod2man /usr/ports/net/shelldap/work/shelldap-1.5.1/shelldap /usr/ports/net/shelldap/work/shelldap-1.5.1/shelldap.1 make: exec(/usr/local/bin/pod2man): No such file or directory *** Error code 1
net/vether-kmodhenning.matyschok@outlook.comBSD2CLAUSE ISCL===> vether-kmod-g20211214.1501502_1 is marked as broken on FreeBSD 15.1: if_vether.c:145:16: error: incomplete definition of type 'struct ifnet'. *** Error code 1
net/vmware-vsphere-clizi@FreeBSD.orgVMware /usr/ports/distfiles, then restart the build. make: exec(exit): No such file or directory *** Error code 1
net/wifibox-alpinepali.gabor@gmail.comBSD2CLAUSE===> wifibox-alpine-20260329 needs compat.linux.emul_path to point to an existing directory. *** Error code 1
net/xrdp-develmeta@FreeBSD.orgAPACHE20=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
ports-mgmt/dialog4portsrum1cro@yandex.ruBSD2CLAUSE===> dialog4ports-0.1.6_2 is marked as broken: Requires libdialog in base. *** Error code 1
ports-mgmt/dialog4ports-staticrum1cro@yandex.ruBSD2CLAUSE===> dialog4ports-static-0.1.6_2 is marked as broken: Requires libdialog in base. *** Error code 1
ports-mgmt/pkg-develpkg@FreeBSD.orgBSD2CLAUSE===> pkg-devel-2.8.99.1 WITH_PKG is not defined to 'devel', this version is the devel one. *** Error code 1
print/epson-inkjet-printer-201401whello@blubee.meEPSON LGPL21=> Couldn't fetch it - please try to retrieve this => port manually into /usr/ports/distfiles and try again. *** Error code 1
print/epson-inkjet-printer-201601wports@FreeBSD.orgEPSON LGPL21Download epson-inkjet-printer-201601w-1.0.0-1lsb3.2.x86_64.rpm, place it in /usr/ports/distfiles and restart this build. *** Error code 1
science/ascentyuri@FreeBSD.orgBSD3CLAUSEcompilation fails with clang-19, see https://github.com/Alpine-DAV/ascent/issues/1422. *** Error code 1
science/bout++-merging-filamentsyuri@FreeBSD.orgGPLv3===> bout++-merging-filaments-g20200812_2 is marked as broken: build fails, see https://github.com/boutproject/merging-filaments/issues/6. *** Error code 1
science/fvcomjwb@FreeBSD.orgfvcomto download the source code sourcecode1.tar.gz and place it in /usr/ports/distfiles/fvcom/. *** Error code 1
science/fvcom-mpijwb@FreeBSD.orgfvcomin order to download the source code sourcecode1.tar.gz and place it in /usr/ports/distfiles/fvcom/. *** Error code 1
science/libgridxcyuri@FreeBSD.orgBSD3CLAUSEupstream claims this and downstream (Siesta) are unmaintained, but this does not appear universally true. *** Error code 1
science/linux-ai-ml-envarrowd@FreeBSD.orgMULTI=> Attempting to fetch https://arrowd.name/miniconda3.tar.gz miniconda3.tar.gz *** Signal 15 *** Signal 15
science/msmsyuri@FreeBSD.orgMSMS_LICENSE=> Couldn't fetch it - please try to retrieve this => port manually into /usr/ports/distfiles and try again. *** Error code 1
science/namdyuri@FreeBSD.orgNAMD_MOLECULAR_DYNAMICS_LICENSEhttps://www.ks.uiuc.edu/Development/Download/download.cgi?PackageName=NAMD, put it into /usr/ports/distfiles, and run 'make' again. *** Error code 1
science/p5-Chemistry-OpenSMILESwen@FreeBSD.orgBSD3CLAUSEfetch: http://ftp.twaren.net/Unix/Lang/CPAN/modules/by-module/Chemistry/Chemistry-OpenSMILES-0.12.0.tar.gz: Forbidden => Attempting to fetch ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Chemistry-OpenSMILES-0.12.0.tar.gz *** Signal 15
science/py-GPyyuri@FreeBSD.orgBSD3CLAUSE===> py312-GPy-1.13.2_2 is marked as broken: fails to build with NumPy 2.x. *** Error code 1
science/py-gpawyuri@FreeBSD.orgGPLv3+===> py312-gpaw-25.7.0 is marked as broken: fails to build with NumPy 2.x. *** Error code 1
science/salome-kernelyuri@FreeBSD.orgLGPL21+===> salome-kernel-9.11.0_7 is marked as broken: fails to build with NumPy 2.x. *** Error code 1
science/vmdports@FreeBSD.orgVMD BSD3CLAUSE STRIDEof Illinois agreement before you can download the vmd-1.9.4a57.src.tar.gz source. Place this distfile in /usr/ports/distfiles and try again.. *** Error code 1
security/autofirmafernape@FreeBSD.orgGPLv2 EUPL11zip -d /usr/ports/security/autofirma/work/usr/lib/Autofirma/autofirma.jar "nss/WINDOWS/*" "windows/*" "osx/*" "linux/*" /bin/sh: zip: not found *** Error code 127
security/dsniffsbz@FreeBSD.orgBSD3CLAUSE===> dsniff-2.4.b1_9 is marked as broken on FreeBSD 15.1: fails to compile : conflicting types for 'pcap_init'. *** Error code 1
security/libotr3cs@FreeBSD.orgLGPL21=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
security/p5-CPAN-Auditjadawin@FreeBSD.orgART10 GPLv1+fetch: http://ftp.twaren.net/Unix/Lang/CPAN/modules/by-module/CPAN/CPAN-Audit-20250829.001.tar.gz: Forbidden => Attempting to fetch ftp://ftp.cpan.org/pub/CPAN/modules/by-module/CPAN-Audit-20250829.001.tar.gz *** Signal 15
security/softether-develmeta@FreeBSD.orgAPACHE20===> softether-devel-4.43.9799.b no beta version available right now, use security/softether instead. *** Error code 1
shells/ast-kshsaper@saper.infoEPLfrom 'size_t (wchar_t *, const char *, size_t)' (aka 'unsigned long (int *, const char *, unsigned long)') [-Wincompatible-function-pointer-types]. *** Error code 1
sysutils/arcconffsbruva@yahoo.comMicrochipMicrochip software license agreement, and download arcconf_B28391.zip into /usr/ports/distfiles. *** Error code 1
sysutils/atf-masteruboot@FreeBSD.orgBSD3CLAUSE===> atf-NONE-v2.14.6 is a metaport; there is nothing to build. *** Error code 1
sysutils/backuppc-develmoiseev@mezonplus.ruGPLv3cd /usr/ports/sysutils/backuppc-devel/work/backuppc-174e707 && /usr/local/bin/perl makeDist --nosyntaxCheck --version 4.4.1.20231111 /bin/sh: /usr/local/bin/perl: not found *** Error code 127
sysutils/fvcoolports@FreeBSD.orgBSD3CLAUSE===> fvcool-1.0.4 is only for i386, while you are running amd64. *** Error code 1
sysutils/kvmclock-kmoddch@FreeBSD.orgBSD2CLAUSE===> kvmclock-kmod-0.0.0.a5.1501502 included in base system. *** Error code 1
sysutils/libieee1284ports@FreeBSD.orgGPLv2+===> libieee1284-0.2.11_1 is only for i386, while you are running amd64. *** Error code 1
sysutils/megarcports@FreeBSD.orgLSI/usr/ports/distfiles and try again. For further instructions, see http://www.freebsdwiki.net/index.php/Megarc. *** Error code 1
sysutils/py-saltkrion@FreeBSD.orgAPACHE20===> py312-salt-3006.26,1 is marked as broken: does not work with Python 3.12 or newer, see https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=296290. *** Error code 1
sysutils/raincoatports@FreeBSD.orgGPLv2+===> raincoat-0.11_1 is only for i386, while you are running amd64. *** Error code 1
sysutils/sas3ircuports@FreeBSD.orgBROADCOM After the download has completed, please place SAS3IRCU_P16.zip in /usr/ports/distfiles, then restart the build. *** Error code 1
sysutils/storclitakefu@airport.fmstorclihttps://docs.broadcom.com/docs-and-downloads/host-bus-adapters/host-bus-adapters-common-files/sas_sata_nvme_12g_p37/STORCLI_SAS3.5_P37.zip, place it in /usr/ports/distfiles/storcli7.3603 and then run make again. *** Error code 1
sysutils/storcli2takefu@airport.fmstorclihttps://docs.broadcom.com/docs-and-downloads/StorCLI_Avenger_8.17_08.017.000.0008.zip, place it in /usr/ports/distfiles/storcli2-8.17 and then run make again. *** Error code 1
sysutils/terraformdutra@FreeBSD.orgBUSL11 github.com/armon/go-metrics.test imports github.com/pascaldekloe/goe/verify: module github.com/pascaldekloe/goe@latest found (v0.1.0), but does not contain package github.com/pascaldekloe/goe/verify *** Error code 1
sysutils/toshctlports@FreeBSD.orgGPLv2+===> toshctl-0.0.0p3_1 is only for i386, while you are running amd64. *** Error code 1
sysutils/twmnports@FreeBSD.orgLGPL3===> twmn-g20190917_11 is marked as broken: fails to build with Boost>=1.87. *** Error code 1
sysutils/u-boot-masteruboot@FreeBSD.orgGPLv2===> u-boot-NONE-2026.07 is a metaport; there is nothing to build. *** Error code 1
sysutils/wmapmloadports@FreeBSD.orgGPLv2===> wmapmload-0.3.4_3 is only for i386, while you are running amd64. *** Error code 1
textproc/goldendictdanfe@FreeBSD.orgGPLv3+=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
textproc/linux-c7-expatemulation@FreeBSD.orgMIT=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
textproc/linux-c7-libxml2emulation@FreeBSD.orgMIT=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
textproc/linux-rl9-expatemulation@FreeBSD.orgMIT=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
textproc/linux-rl9-libxml2emulation@FreeBSD.orgMIT=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
textproc/pdf-reader-mcpyuri@FreeBSD.orgMITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
textproc/py-gensimyuri@FreeBSD.orgLGPL21===> py312-gensim-4.3.3_2 is marked as broken: fails to build with NumPy 2.x. *** Error code 1
textproc/regex2dfaegypcio@FreeBSD.orgAPACHE20./../include/fst/bi-table.h:356:31: error: no member named 's_' in 'VectorHashBiTable<I, T, S, FP, H, HS>'. *** Error code 1
www/domoticzkiwi@FreeBSD.orgGPLv3===> domoticz-2025.2_1 is marked as broken: Fails to build with boost 1.91.0. *** Error code 1
www/domoticz-develkiwi@FreeBSD.orgGPLv3===> domoticz-devel-2025.2.16997_1 is marked as broken: Fails to build with boost 1.91.0. *** Error code 1
www/envoydanfe@FreeBSD.orgAPACHE20===> envoy-1.26.1_14 is marked as broken: does not build with DEFAULT_VERSIONS+=ssl=base: requires BoringSSL. *** Error code 1
www/httpclientale@FreeBSD.orgAPACHE20=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
www/linux-braveemulation@FreeBSD.orgMPL20*** Error code 1 make[1]: stopped making "checksum" in /usr/ports/www/linux-brave *** Error code 1
www/mcp-server-browserbaseyuri@FreeBSD.orgMITerror: the 'jq' dependency is missing ... please install the 'jq' package *** Error code 1
www/p5-MojoX-Log-Dispatch-Simplebokutin@bokut.inARTPERL10 GPLv1+fetch: http://ftp.twaren.net/Unix/Lang/CPAN/modules/by-module/MojoX/MojoX-Log-Dispatch-Simple-1.15.tar.gz: Forbidden => Attempting to fetch ftp://ftp.cpan.org/pub/CPAN/modules/by-module/MojoX-Log-Dispatch-Simple-1.15.tar.gz *** Signal 15
www/py-lektoregypcio@FreeBSD.orgBSD3CLAUSE===> py312-Lektor-3.3.10_1 is marked as broken: py312-Lektor-3.3.10_1 depends on package: py312-werkzeug<=3 - not found. *** Error code 1
www/rubygem-rack16sunpoet@FreeBSD.orgMIT=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
www/ungoogled-chromiumchromium@FreeBSD.orgBSD3CLAUSE LGPL21 MPL11=> Note: Vulnerable ports are marked as such even if there is no update available. => If you wish to ignore this vulnerability rebuild with 'make DISABLE_VULNERABILITIES=yes' *** Error code 1
x11-fonts/cyberbit-ttfontsdanfe@FreeBSD.orgCYBERBIT===> cyberbit-ttfonts-2.0.20050220_5 is marked as broken: does not fetch. *** Error code 1
x11/budgie-desktopduchateau.olivier@gmail.comGPLv2 LGPL21===> budgie-desktop-10.9.3_2 is marked as broken: Fails to build, vapigen command fails. *** Error code 1

RESTRICTED (1)

RESTRICTED means FreeBSD can't redistribute/mirror the distfile -- it does NOT reliably mean this tool couldn't fetch it (many RESTRICTED ports fetch fine directly from their own upstream). Listed here purely as a distribution-legal flag worth knowing about, independent of fetch_status.
PortMaintainerLICENSEFetch status
x11-fonts/iosevka-comfydsh@bamus.czOFL11ok